Active edge control in the precessions polishing process for manufacturing large mirror segments

Li, Hongyu, Zhang, Wei, Walker, David and Yu, Guoyu (2014) Active edge control in the precessions polishing process for manufacturing large mirror segments. In: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 2 September 2014, Harbin, China.

id171_Yu_Active_edge_control_in_the_precessions_polishing_process.pdf - Presentation

Download (2MB) | Preview


The segmentation of the primary mirror is the only promising solution for building the next generation of ground telescopes. However, manufacturing segmented mirrors presents its own challenges. The edge mis-figure impacts directly on the telescope’s scientific output. The ‘Edge effect’ significantly dominates the polishing precision. Therefore, the edge control is regarded as one of the most difficult technical issues in the segment production that needs to be addressed urgently. This paper reports an active edge control technique for the mirror segments fabrication using the Precession's polishing technique. The strategy in this technique requires that the large spot be selected on the bulk area for fast polishing, and the small spot is used for edge figuring. This can be performed by tool lift and optimizing the dell time to compensate for non-uniform material removal at the edge zone. This requires accurate and stable edge tool influence functions. To obtain the full tool influence function at the edge, we have demonstrated in previous work a novel hybrid-measurement method which uses both simultaneous phase interferometry and profilometry. In this paper, the edge effect under ‘Bonnet tool’ polishing is investigated. The pressure distribution is analyzed by means of finite element analysis (FEA). According to the ‘Preston’ equation, the shape of the edge tool influence functions is predicted. With this help, the multiple process parameters at the edge zone are optimized. This is demonstrated on a 200mm cross-corners hexagonal part with a result of PV less than 200nm for entire surface.

Item Type: Conference or Workshop Item (Paper)
Keywords: Edge effect, Precessions polishing, Tool influence function, Edge control
Divisions: Applied Science, Computing and Engineering
Depositing User: Mr Stewart Milne
Date Deposited: 06 May 2015 13:08
Last Modified: 19 Dec 2017 15:14

Actions (login required)

Edit Item Edit Item