Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS
Group by: Creators | Item Type
Number of items at this level: 29.

Article

Ali, K., Peng, D, Jones, R, Singh Raman, R.K., Zhao, X.L., McMillan, A.J. and Berto, F (2016) Crack growth in a naturally corroded bridge steel. Fatigue and Fracture of Engineering Materials and Structures, 40 (7). pp. 1117-1127. ISSN 8756-758X

Day, Richard, Khan, Laraib A. and Kausar, Ayesha (2017) Aerospace composite cured by quickstep and autoclave processing techniques: Evaluation and comparison of reaction progress. Aerospace Science and Technology, 65. pp. 100-105. ISSN 1270-9638

Day, Richard, Khan, Laraib A. and Kausar, Ayesha (2017) Aerospace composite cured by quickstep and autoclave processing techniques: Evaluation and comparison of reaction progress. Aerospace Science and Technology, 65. pp. 100-105. ISSN 1270-9638

Green, J E, Nuhiji, B, Zivtins, K, Bower, P, Grainger, R V, Day, Richard and Scaife, R J (2017) Internal Model Control of a Domestic Microwave for Carbon Composite Curing. IEEE Transactions on Microwave Theory and Techniques, 65 (11). ISSN 0018-9480

Jones, R, Singh Raman, R.K. and McMillan, A.J. (2017) Crack growth: Does microstructure play a role? Engineering Fracture Mechanics, 187. pp. 190-210. ISSN 0013-7944

McMillan, A.J., Jones, R, Peng, D and Chechkin, G.A. (2018) A computational study of the influence of surface roughness on material strength. Meccanica. ISSN 0025-6455

McMillan, A.J. and Jones, Rhys (2020) Combined effect of both surface finish and sub-surface porosity on component strength under repeated load conditions. Engineering Reports. ISSN 2577-8196 (In Press)

McMillan, A.J. and Jones, Rhys (2020) Implications of surface finish and sub-surface porosity on component life prediction. Engineering Reports. ISSN 2577-8196

Miah, Md Salim, Hossain, M.S., Ashraf, M.A., Al-Assaf, Saphwan and McMillan, A.J. (2017) Numerical simulation of non-Newtonian polymer film flow on a rotating spoked annulus. Applied Polymer Science. ISSN 0021-8995

Miah, Md Salim, Hossain, M.S., Ashraf, M.A., Al-Assaf, Saphwan and McMillan, A.J. (2016) Numerical simulation of non-Newtonian polymer film flow on a rotating spoked annulus. Applied Polymer Science. ISSN 0021-8995

Nuhiji, Betime, Bower, Matthew P, Swait, Timothy, Phadnis, Vaibhav, Day, Richard and Scaife, Richard J (2020) Simulation of carbon fibre composites in an industrial microwave. Materials Today: Proceedings. ISSN 2214-7853

Pearson, John L, Roberts, Gareth W, Rees, Paul and Thompson, Samantha J (2015) Use of a NOM profilometer to measure large aspheric surfaces. Proc. SPIE 9628, Optical Systems Design 2015: Optical Fabrication, Testing, and Metrology V, 9628.

Pike, Joanne, Picking, Rich and Cunningham, Stuart (2020) Robot companion cats for people at home with dementia: a qualitative case study on companotics. Dementia. ISSN 1471-3012

Rees, Paul C. T., Baker, Ian P., Thomson, David A., Catterall, Dean, Coleman, Martin, Jones, Martyn L. and Mitchell, John B. (2020) Development of a lightweight camera for high altitude platform systems. Optical Engineering, 59 (10). ISSN 0091-3286

Rees, Paul and Gray, Caroline (2015) Metrology requirements for the serial production of ELT primary mirror segments. Proc. SPIE 9575, Optical Manufacturing and Testing XI, 9575.

Rees, Paul, Mitchell, John B, Volkov, Andy, Asfour, Jean-Michel, Weidner, Frank, Poleshchuk, Alexander G and Nasyrov, Ruslan K (2015) The use of diffractive imitator optics as calibration artefacts. Proc. SPIE 9575, Optical Manufacturing and Testing XI, 9575.

Shoaib, Sultan, Shoaib, Nosherwan, Khattak, Riqza Y. Y., Shoaib, Imran, Rehman, Masood Ur and Yang, Xiaodong (2019) Design and Development of MIMO Antennas for WiGig Terminals. Electronics, 8. p. 12. ISSN 2079-9292

Conference or Workshop Item

Anuchin, Alecksey, Bogdanov, Andrei, Demidova, Galina, Stolyarov, Evgeniy, Surnin, Dimid and Vagapov, Yuriy (2020) Online magnetization surface identification for a switched reluctance motor. In: 55th IEEE Int. Universities Power Engineering Conference UPEC-2020, 1-4 Sept 2020, Torino, Italy.

Baghsiahi, Hadi, Jones, Martyn, Brooks, David and Doel, Peter (2019) Design, Simulation and Manufacturing a CFRP Prototype Mirror for Active/Adaptive Optics. In: SPIE Optifab, 14-17 October 2019, Rochester, New York, United States.

Bolam, Robert and Vagapov, Yuriy (2017) Curriculum development of undergraduate and post graduate courses on small unmanned aircraft. In: Universities Power Engineering Conference UPEC-2017, 28-31 Aug 2017, Heraklion, Greece.

Bolam, Robert, Vagapov, Yuriy and Anuchin, Alecksey (2020) Performance comparison between copper and aluminium windings in a rim driven fan for a small unmanned aircraft application. In: 11th Int. Conf. on Electrical Power Drive Systems (ICEPDS), 4-7 Oct. 2020, Saint-Petersburg, Russia.

Bolam, Robert, Vagapov, Yuriy, Laughton, Jon and Anuchin, Alecksey (2020) Optimum performance determination of single-stage and dual-stage (contra-rotating) rim driven fans for electric aircraft. In: 11th Int. Conf. on Electrical Power Drive Systems (ICEPDS), 4-7 Oct. 2020, Saint-Petersburg, Russia.

Jahanbin, M, Santhanam, S, Ihn, J.B and McMillan, A.J. (2019) Application of Ultrasonic Guided Waves for Surface Roughness Measurement. In: 12th International Workshop on Structural Health Monitoring 2019, September 10-12, 2019, September 10-12, 2019, Stanford, California, USA.

Manz, Andreas, Monir, Shafiul and Jones, Martyn (2017) An Experimental and Numerical Investigation of Drag Reduction Through Biomimetic Modelling. In: 7th IEEE Int. Conference on Internet Technologies and Applications ITA-17, Wrexham, UK, 12-15 September 2017, Wrexham, UK.

Sanchez, Quentin, Jones, Martyn, Monir, Shafiul, Vagapov, Yuriy and Lupin junior, Sergey (2020) Evaluation of methodology for the carbon fibre recycling. In: 2020 IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference, 27-30 January 2020, Moscow, Russia.

Spencer, Locke D, Veenendaal, Ian D, Naylor, David A, Gom, Brad G, Huber, Anthony I, Christiansen, Adam, Benson, Chris S, Gunuganti, Sudhakar, Jones, Martyn, Day, Richard, Walker, David, Zobeiry, Navid, Poursartip, Anoush and Sitwell, Geoffrey R H (2018) Composite Material Evaluation at Cryogenic Temperatures for Applications in Space-Based Far-Infrared Astronomical Instrumentation. In: Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, SPIE Astronomical Telescopes + Instrumentation, 10-15 June 2018, Austin, Texas, USA.

Stuhlfelder, Colin (2018) Which Version™? Exploring the digital modelling of architecturally important sites and the implications on the understanding of the historical narrative the model reflects. In: 7th International Congress on Architectural Technology (ICAT 2018): Architectural Technology at the Interfaces, 14-17 June 2018, Belfast, UK.

Vagapov, Yuriy, Veligorskyi, Oleksandr, Chakirov, Roustiam and Khomenko, Maksym (2019) Artificial neural network motor control for full-electric injection moulding machine. In: IEEE International Conference on Industrial Technology, 13-15 February 2019, Melbourne, Australia.

Wu, Y, Yang, X, Barrioz, V, Rigby, S and Huang, Xiaobing (2016) Numerical simulation and analytical models for thin film CdTe layers deposited by an inline AP-metalorganic chemical vapour deposition process. In: 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 11-13 July 2016, Costa de Sol, Spain.

This list was generated on Thu Nov 26 04:40:31 2020 GMT.